DRIVER'S SIDE FRONT AIR GALLERY (from front to back) Inner Diameter
(I.D. mm)
Stock
Length
(inches)
Modified
Length
(1) to FPR Control Valve (bottom) 4 mm 21" 15"
(2) to FPR Control Valve (top) 4 mm 23" 15"
(3) to Manifold 6 mm 20" 19"
(4) to Throttle (right port) 4mm 13.5" 12"
LEFT SIDE of FRONT AIR GALLERY Inner Diameter
(I.D. mm)
Stock
Length
(inches)
(5) to Manifold Front 4 mm 3"
(6) to FPR 4 mm 3"
(7) to Carbon Canister (bottom, left port) 6 mm 14.5"
(8) to Carbon Cansiter (top, left port) 4 mm 16.5"
REMAINING HOSES (currently excludes A/C and Cruise Lines) Inner Diameter
(I.D. mm)
Stock
Length
(inches)
(9) EGR Control to EGR 4 mm 5"
(10) EGR Control Valve to Rear Gallery (pass) 4 mm 2.5"
(11) 'TEE' to Boost Sensor (see above) 3mm 7" (5" modifed)
(12) 'TEE' to AIV Control Valve (Top) (see above) 4mm 12"
(13) AIV Control Valve (Bottom) to Intake Front 4mm 13"
(14) AIV Control Valve (Middle) to AIV (see above) 4mm 5"
(15) Throttle to Rear Gallery (driver) 4mm 10.5"
(16) Manifold to 'TEE' (see above) 4mm 35" (25" modified)
(17) Intake to Carbon Canister (right port) 6mm 46" (38" modified)
(18) Headlight Motor Vent Lines (Clear Vinyl Tubing Home Depot) 3/16" 2 x 7"
(19) Vacuum Pump to Vacuum Canister 3mm ~26"
(20) Carbon Canister (middle port) to Fuel Return Hardline 6mm 9"
     
VACUUM TANK HOSES    
Intake to Vacuum Tank 3mm 46" (modified)
Cruise to Vacuum Tank 4mm 28" (modified)
A/C Heater Cock Control to Vacuum Tank 3mm 39" (modified)
Vacuum Tank to Firewall not measured ~6 feet
     
COOLANT and BRAKE BOOSTER HOSES    
Passenger Side MANIFOLD Coolant Line to Rear Gallery 10mm 9"
Passenger Side COLLECTOR Coolant Line to Manifold 10mm ~5-6" (OEM is formed hose)
Throttle Coolant Line to Driver Side Gallery 10mm 7"
Throttle Coolant Line to Turbo Passage 10mm 10"
Turbo Coolant Line to Driver Side Gallery 10mm 10"
Coolant Reservoir Line to Coolant Tube 6mm 23" (could be shortened)
Manifold to Brake Booster Check Valve 10mm 3" (modified // OEM is formed hose)
Brake Boost Check Valve to Brake Booster 10mm 4" (modified // OEM is formed hose)